Water cooling conveyoris a specifically designed auxiliary machine to avoid the sticking of hot rubber blanks that produced on a precision performer. After cooling down with cooling water or cooling solution and forcible cooling wind, the rubber blanks will not become deformed and more table. The feature of the machine is the running speed can be adjusted by the horizontal stainless steel net belt during the whole process, to go with all the cutting speeds of precision preformer.
Vibra Cooling Conveyor is a specifically designed auxiliary machine to avoid the sticking of hot rubber blanks that produced on a precision performer. It is space –saving, the part directly contact with rubber blanks is stainless steel to prevent contamination. Rubber blanks travel through vibratory way to prevent the stickiness and deformation effectively. It is with long cooling distance at 35 meter, the max. cooling distance up to 50 meter. The cooling process can be strengthened by air or spraying water. For small rubber blanks, can use the air cooling with cover; for the heavy weight and much hot rubber blanks, can use circulation water connected with external reservoir to spray water. Especially with prominent cooling effect for FKM, NBR, CR, EPDM, pelleting, bearing seals, oil seals and O-rings etc.
Optional:
- Air chiller: chilled air cooling
- surrounded by a cover
Items |
Unit |
LSZ1050 |
Vibration groove diameter |
mm |
1050 |
Vibration Groove width |
mm |
245 |
Vibration groove height |
mm |
1600 |
Material running distance |
mm |
35000 |
Helical pitch |
mm |
110 |
Width of inlet |
mm |
650 |
Height of inlet (Off the ground) |
mm |
300 |
Width of outlet |
mm |
220 |
Height of outlet (Off the ground) |
mm |
1650 |
Conveying Speed (adjustable) |
m/min |
6~8 |
Power for vibration motors |
kW |
0.75*2 |
Power for cooling fan |
kW |
3.7 |
Power for water pump |
|
0.37 |
Total power |
kW |
5.6 |
External Dimension (LxWxH) |
m |
2800×1400×2700 |
Weight |
kg |
1200 |
可选:
- Elevated device for slope conveyor, easy to clean rubber chippings in reservoir.
- Spraying device.
- Chiller connected with external reservoir.
- Plastic net belt, No metal chips.
Items |
Unit |
LSS650 |
Sloping conveyor(stainless steel material) |
||
Water tank dimension |
mm |
2000×760×300 |
Distance of blank conveying (in water) |
mm |
1300 |
Slope conveying width |
mm |
450 |
Slope conveying speed |
m/min |
7.6 |
Slope cooling air volume |
m3/h |
3720 |
Horizontal conveyor |
||
Horizontal conveying width |
mm |
450 |
Horizontal conveying speed (adjustable) |
m/min |
3.1~6.2 |
Layers |
|
3 |
Horizontal cooling air volume |
m3/h |
29040 |
Total power |
kW |
2.6 |
External dimension |
mm |
6100×750×1840 |
Weight |
kg |
1200 |
Other Water Cooling Unit
LSS-Q800 clean-up & auto-weighing water cooling conveyer is a specifically designed auxiliary machine to avoid the sticking of hot rubber blanks that produced on a precision performer, which used for cooling, conveying, drying, weighing and sorting rubber compounds into charging-basket.
Rubber blanks cut by precision preformer can be sorted into charging-baskets after dipping into water, conveying, drying then delivered by cross belt conveyer. When the rubber compounds reach the set weight, the cross belt conveyer will stop running, the basket-pushed device will change this full charging-basket with an empty one automatically, and cross belt conveyer will run again to fulfill the functions of auto-weighing, automatic basket-sorting and automatic basket-changing.
Meanwhile, full charging basket will be delivered to roller conveying line, and then operating personnel can deal with it. Water-dipping device facilitates to cool down the rubber blanks and to avoid polluted by kinds of rubber chippings mutually. There is a charging-basket for remaining compounds which is easy to take out and clean up. When there is no rubber compound on the cooling conveyer, it will stop after 5 minutes’ automatic dry run.
Items |
Unit |
LSS-Q800 |
Water-dipping conveying speed |
m/min |
4-8 |
Conveying length |
mm |
1500 |
Slope conveyor belt speed |
m/min |
3-6 |
Slope cooling air volume |
m3/h |
3720 |
Horizontal conveyor |
||
Horizontal conveying width |
mm |
450 |
Horizontal conveying speed (adjustable) |
m/min |
3.1~6.2 |
Layers |
|
3 |
Horizontal cooling air volume |
m3/h |
29040 |
Total power |
kW |
2.6 |
External dimension |
mm |
6100×750×1840 |
Weight |
kg |
1200 |
1.Water-dipping conveying net belt speed::4-8 m/min Conveying length:: 1500mm
2.Slope conveying net belt speed: 3-6m/min (infinite speed regulation) Conveying length: 3000mm
3.Horizontal conveying net belt speed: 1.5-3m/min (infinite speed regulation) Conveying length: 4000mm
4.&=1.5mm stainless steel net belt, belt width: 300mm
5.Weight range for rubber compounds in charging-basket:10~20kgs/basket(adjustable) customized accordingly if outside this range
6.Overall dimension (L*W*H) 9000*2400*2100mm
7.Weight: 2000kgs
8.Select matching charging-basket dimension:Charging-basket base L*W : (500-600)*(400-460)mm
Charging-basket Height:150-170mm
Automatic basket-changing device will be customized as per charging-basket external dimension.
Copyright © 2016 Suzhou Kunshuo Machinery Co.,Ltd.   Technical support: YovYov   苏ICP备16031602号
Cooperation Link : WELL SHYANG MACHINERY CO., LTD.